Candy Powder Ribbon Mixer is a ribbon mixer used for mixing materials like powdered sugar. Powdered sugar is fine, prone to clumping, separating, and flying around, making it difficult for ordinary mixers to balance uniformity and cleanliness. However, the ribbon mixer, with its inner and outer double-layered ribbon convection shear motion, allows the powdered sugar to be fully agitated at low speeds, achieving a mixing uniformity of over 99%. The low-speed design significantly reduces dust flying, and the fully sealed structure combined with a quick-opening door ensures rapid and residue-free cleaning, fully meeting food-grade hygiene requirements. Our company specializes in the research, development, and manufacturing of ribbon mixers. With years of experience in powder mixing equipment, from structural design to process optimization, each machine is tailored to the specific needs of powdered sugar processing. We also support non-standard customization, enabling us to produce custom-made equipment based on site conditions and upstream/downstream production equipment.
In the sugar powder mixing process of baking and confectionery, powders are prone to dust generation, clumping, and inconsistent proportions, making it difficult for ordinary equipment to achieve both uniform mixing and material preservation. The ribbon mixer, with its unique double-layer ribbon convection mixing structure, is suitable for the dry mixing requirements of sugar powder and auxiliary materials, ensuring both mixing uniformity and material integrity.
| Core Advantages | Core Value |
| High mixing uniformity | Solves the problem of large differences in the ratio of powdered sugar to flavorings, colorings, and other auxiliary ingredients, avoiding localized clumping and uneven composition. |
| High mixing efficiency | Single batch mixing takes only 1-10 minutes, and discharge is completed in 1-2 minutes. |
| Thorough Cleaning | The fully opening lid and extremely small gaps in the canister wall eliminate residue blind spots, preventing cross-contamination of sugar powder and spoilage due to moisture. |
| Highly adaptable and suitable for various formulation needs | It is suitable for both dry and wet mixing scenarios, and can be equipped with a liquid spraying device to complete the mixing of sugar powder and liquid adjuvants in one step. |
| Low Material Residue | During discharge, the screw conveyor continuously pushes the material, resulting in extremely low residue and preventing waste of expensive sugar powder raw materials. |
| Flexible mixing | Low linear velocity (1.8-2.2 m/s) flexible mixing does not damage the sugar powder crystal structure, maintaining the original particle size and flowability. |
Dahan Machinery has specifically optimized our equipment to address four major pain points of powdered sugar: clumping, stratification, dust accumulation, and difficulty in cleaning. Our ribbon mixer has undergone hundreds of tests, achieving a stable mixing uniformity of over 99%. The low-speed design reduces dust concentration by 60%. The fully sealed, quick-opening door allows for cleaning in just 10 minutes. Optional mirror polishing of the inner wall meets food-grade and GMP requirements. We currently serve over 1000 companies in the food, pharmaceutical, and chemical industries. Each machine supports trial runs with supplied materials, demonstrating its effectiveness firsthand.
In the powdered sugar processing industry, the ease with which materials generate dust, clump, and are susceptible to pulverization pose significant mixing challenges. Many baking ingredient and food ingredient manufacturers have chosen our ribbon mixers for production. Based on years of practical experience in powder mixing, our equipment is suitable for processing various compound powdered sugar formulations.
Sugar substitute manufacturer: Producing 10 tons of erythritol powder daily, the original V-type mixer achieved only 92% mixing uniformity, requiring 40 minutes for each batch cleaning, resulting in severe dust pollution in the workshop. In 2025, they introduced our ribbon mixer, with a single feed rate of 400kg, improving mixing uniformity to 99.9%, reducing cleaning time to 8 minutes, decreasing workshop dust concentration by 65%, and increasing product qualification rate from 96% to 99.8%.
White sugar deep processing: The company produces 8 tons of icing sugar daily, requiring the mixing of white sugar and corn starch in a 7:3 ratio. The original equipment resulted in uneven mixing and severe product stratification. After replacing the mixer with our LHY-3 ribbon mixer, a single feed rate of 300kg achieved 99.5% mixing uniformity, completely resolving the stratification problem.
Pharmaceutical excipient production: Mixing micronized pharmaceutical excipients, with a single batch feed rate of 100kg, requires extremely high cleanliness and must meet GMP standards. The original equipment had poor sealing, resulting in significant residue during cleaning and high risk of batch changes. After adopting our fully sealed ribbon mixer, the inner wall mirror polishing Ra≤0.8μm, single batch mixing time is 10 minutes, and it has been running stably for 15 months, successfully passing two inspections by the drug regulatory authorities.
Our factory relies on mature production facilities and a comprehensive after-sales system to provide all-round one-stop support services. From formula debugging and sample trial production to machine selection, we can connect you with your needs and tailor ribbon mixers to your specific sugar powder mixing requirements.
Selection Consultation: We provide free equipment selection solutions based on your material characteristics, production needs, and workshop conditions.
Material Trial Run: We offer free sample testing services to verify mixing effects on-site and customize suitable mixing solutions for you.
Custom Design: Non-standard requirements can be customized. Ribbon structure, chamber dimensions, sealing methods, and heating/cooling jackets can all be adjusted as needed.
After-sales Guarantee: Long-term supply of vulnerable parts, free skills training, and one-on-one professional after-sales guidance.
We are the original manufacturer of Candy Powder Ribbon Mixer, eliminating middlemen and their markups. We support production and customization services, using advanced equipment such as ribbon mixers in a fully enclosed, dust-free production environment, ensuring uniform mixing, fine particles, and preventing clumping.
Address:China,Yanjin county forest park gate to the west 1000 meters north road.
Online Chat 
Email